![background image](http://html2.mh-extra.com/html/xerox/workcentre-5325/workcentre-5325_administrators-manual_4257192029.webp)
Network Configuration
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
29
LPD
The Line Printer Daemon (LPD) protocol is used to provide printer spooling and network print server
functionality for operating systems such as HP-UX, Linux, and MAC OS X.
Note:
For information on setting up print queues on your client system, refer to your client
system’s documentation.
Enabling LPD
1.
In CentreWare IS, click
Properties
>
Connectivity
>
Port Settings
.
2.
Next to
LPD
, select the
Enabled
check box.
Note:
Disabling LPD will affect clients printing to the printer over TCP/IP using the LPR
printing port.
Configuring LPD
1.
In CentreWare IS, click
Properties
>
Connectivity
>
Protocols
>
LPD
.
2.
Type an LPD
Port Number
or use the default port number of 515.
3.
Enter the
Connection Time-Out
.
4.
Enter the
Maximum Number of Sessions
.
5.
Next to
TCP-MSS Mode
, select
Enabled
if necessary.
Note:
TCP-MSS settings are common for LPD and Port 9100.
6.
If TCP-MSS mode is enabled, under
IPv4
, type the IP addresses for
Subnet 1
,
2
, and
3
.
7.
Click
Apply
.
Summary of Contents for WorkCentre 5325
