Xerox WorkCentre 3315DN, System Administrator Manual

Page: 28 / 191

TCP/IP
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide 28
TCP/IP
These instructions show you how to configure the following via Internet Services :
• TCP/IP v4 and v6
• Domain Name
• DNS
• Zero Configuration Networking
The machine supports TCP/IP versions 4 and 6. IPv6 can be used instead of or in addition to IPv4.
IPv4 and IPv6 settings can be configured directly at the machine user interface, or remotely, via a web
browser using
Internet Services . To configure TCP/IP settings using Internet Services , refer to Configure
TCP/IP Settings using Internet Services on page 30.
Configure Static IPv4 Addressing using the Machine User Interface
Information Checklist
Before starting please ensure that the following items are available and/or the tasks have been
performed:
• Existing operational network utilizing the TCP/IP protocol.
• Ensure that the machine is connected to the network.
• Static IP Address for the machine.
• Subnet Mask Address for the machine.
• Gateway Address for the machine.
• Host Name for the machine.
Procedure
Enter a Static IP Address:
1. Press the Machine Status button on the control panel .
2. Press the Up/Down arrow buttons to highlight Network Settings ; press OK .
3. Enter the Administrator Password using the alphanumerical keypad. The default is 1111. Refer to
Administrator Access on page 19.
4. Press the OK button; the Network Settings menu displays.
5. Press the Up/Down arrow buttons to highlight TCP/IP(IPv4) ; press OK .
6. Press the Up/Down arrow buttons to highlight Static ; press OK .
7. Press the Up/Down arrow buttons to highlight IPv4 Address ; press OK .
8. Enter the IP Address using the alphanumerical keypad; press OK .
9. Enter details for Subnet Mask using the alphanumerical keypad; press OK .
10. Enter details for Gateway using the alphanumerical keypad; press OK .
11. The Saved screen will display and return to the Network Settings menu.