7. Adjust the paper guides so that they touch the edges of the stack.
The Paper Tray Properties window displays on the Stock Library Manager on the
print server. The Stock Library Manager is not available at the press.
8. From the Tray Properties window, verify that the correct paper information such as
size, type and weight are selected and match the stock loaded in the tray.
9. Select OK to save the information and close the Tray Properties window.
Loading Paper in the OHCF
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load paper into the tray.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
7. Gently push in the tray until it comes to a stop.
The Tray Properties window displays on the print server. You can view and set stock
attributes and verify trays are assigned with the correct stock. The Stock Library
Manager is available from the print server only and not at the press.
8. From the Tray Properties window, enter or verify the correct paper information,
including size, type, weight and, if necessary, paper curl and/or alignment option.
Select the stock and assign the stock to the tray to be used.
9. Select OK to save the information and close the Tray Properties window.
4-3
Xerox
®
Versant™ 2100 Press
Quick Start Guide
Paper and Other Media
