LLaabbeell aanndd EEnnvveellooppee M
Miissffeeeeddss
Probable Causes
Solutions
The label sheet is facing the wrong way in the tray.
• Load label sheets according to the instructions
from the manufacturer.
• Load labels in the tray, face up.
For details, refer to
.
Labels are missing, curled, or pulled away from the
backing sheet.
Do not use any sheet where labels are missing,
curled, or pulled away from the backing sheet.
Envelopes are loaded incorrectly.
You can print envelopes from the Bypass tray or Tray
1.
For details, refer to
.
Envelopes are wrinkling.
• The heat and pressure of the laser printing
process can cause wrinkling.
• Use supported envelopes. For details, refer to
Guidelines for Printing Envelopes
Note:
When you load envelopes long-edge
feed, ensure that you specify landscape
orientation in the print driver.
PPaappeerr JJaam
m M
Meessssaaggee SSttaayyss O
Onn
Probable Causes
Solutions
Paper remains jammed in the printer or finisher.
Recheck the paper path and ensure that you have
removed all of the jammed paper from the printer
and finisher areas.
One of the printer doors is open.
Check the doors on the printer. Close any door that is
open.
Note:
Check for, and remove, torn pieces of paper in the paper path.
218
Xerox
®
VersaLink
®
B70XX Multifunction Printer
User Guide
