Xerox VersaLink B70 Series User Manual Download Page 164

Page: 164 / 285

Note:

Do not load paper above the maximum fill line on the width guides. Overfilling

the tray can cause the printer to jam.

6. Adjust the width guides until they touch the edges of the paper.

7. To change the settings to match the loaded paper, at the control panel, select the correct options

for paper size, type, and color.

8. To confirm the settings, touch

LLooaaddiinngg PPaappeerr iinn TTrraayy 66

The control panel displays a warning message when the paper in the tray is in short supply, or when
the tray is empty.

164

Xerox

VersaLink

B70XX Multifunction Printer

User Guide

Paper and Media

Summary of Contents for VersaLink B70 Series






























































































































































































































































































Search results

Summary of Contents for VersaLink B70 Series

Reviews:

Related manuals for VersaLink B70 Series

Brands by name

Popular brands

Xerox VersaLink B70 Series, User Manual

Search results

Summary of Contents for VersaLink B70 Series

Reviews:

Related manuals for VersaLink B70 Series

Brands by name

Popular brands