Xerox VersaLink B605 User Manual Download Page 157

Page: 157 / 273

4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.

This procedure separates any sheets that are stuck together and reduces the possibility of jams.

5. Load paper into the tray with the print-side face up.

• Load hole-punched paper with the holes to the left.

• Load label-sheets in the tray face up.

• For 1-sided printing, load letterhead paper face up with the top of the paper toward the back

of the tray.

• For 2-sided printing, load letterhead and pre-printed paper face down with the top edge

feeding into the printer.

Note:

Do not load paper above the maximum fill line. Overfilling the tray can cause

the printer to jam.

6. Adjust the length and width guides to fit the paper.

Xerox

VersaLink

B605/B615 Multifunction Printer

User Guide

157

Paper and Media

Summary of Contents for VersaLink B605


















































































































































































































































































Search results

Summary of Contents for VersaLink B605

Reviews:

Xerox VersaLink B605, User Manual, Page: 157 / 273

Search results

Summary of Contents for VersaLink B605

Reviews: