SAFEStor User Guide
Page 27
2.
Using the check boxes, select the disks that you want to assign as a pass through disk.
3.
Assign the attributes to the pass through drive by specifying the following information:
Volume Cache Mode
Select the Cache Mode to be applied to the Pass
Through Drive using the drop down list.
Tagged Command Queuing
Select whether to enable or disable tagged command
queuing using the drop down list.
Max SCSI Speed
Select the maximum SCSI speed to be applied to the
Pass Through Drive using the drop down list.
SCSI Channel:SCSI_ID:SCSI_Lun
Assign the SCSI Channel, SCSI ID and SCSI Lun to the
Pass Through Drive using the drop down list.
4.
Once the attributes have been set, check the Confirm The Operation check box
and then select Submit to create the Pass Through Disk.
Modify Pass Through
This function allows you to modify the attributes of an existing Pass Through Disk. To
modify a Pass Through Disk, follow the procedure below:
1.
From the navigation panel, select Modify Pass Through. The list of available Pass
Through Disks is displayed in the navigation panel.
2.
Using the check boxes, select the Pass Through Drive you wish to modify and click
Submit.
3.
The attributes for the selected Pass Through Drive are displayed in the information
panel.