![background image](http://html1.mh-extra.com/html/xerox/safestor/safestor_user-manual_3300511037.webp)
SAFEStor User Guide
Page 32
2.
The following parameters can be set from this screen:
DHCP Function
Select whether you want to enable or disable
DHCP functionality on the enclosure using
the drop down list.
Local IP Address
Enter the local IP address in the boxes (if
DHCP is disabled)
Gateway IP Address
Enter the Gateway IP address in the boxes
Subnet Mask
Enter the Subnet Mask address in the boxes
HTTP Port Number
Enter the HTTP Port Number in the box.
Telnet Port Number
Enter the Telnet Port Number in the box.
Current IP Address
Displays the current IP address.
Current Gateway IP
Address
Displays the current Gateway IP address.
Current Subnet Mask
Displays the current Subnet Mask.
EtherNet MAC
Address
Displays the MAC address of the unit.
3.
Once the parameters above have been set, check the Confirm The Operation
check box and then click Submit.
Alert By Mail Configuration
This function allows you to configure the system to send an email to specified email addresses
when an event occurs. To configure the Alert By Mail function, follow the procedure below:
1.
From the navigation panel, select Alert By Mail Config. The email alert parameters are
displayed in the information panel.