SAFEStor User Guide
Page 30
System C ontrols
This section describes the System Controls functions of the RAID Management Software. These
functions allow you to configure alarms, notifications and passwords, as well as upgrading
controller firmware and restarting the controller.
System Configuration
This function allows you to set system wide parameters. To set the system parameters, follow this
procedure:
1.
From the navigation panel, select System Config. The system configuration attributes are
displayed in the information panel.
2.
The following system attributes can be set from this screen:
System Beeper Setting
Select whether you want the audible alarm beeper
enabled or disabled using the drop down list.
Background Task
Priority
Set the priority level you wish to apply to
tasks running in the background such as Initialization
etc. using the drop down list.
Terminal Port
Configuration
Set the Baud Rate and Stop Bits parameters
for Terminal Emulation using the drop down lists.
JBOD/RAID
Configuration
Set whether you want the system to run as a
JBOD or a RAID system using the drop down list.
Max SATA Mode
Supported
Set the maximum SATA mode that the system
