UNIX (Linux)
Phaser® 8510/8560MFP Multifunction Product
3-24
Quick Install Steps
Perform the following procedures to set up the system and install the appropriate drivers.
From the System
To set up the system:
1.
Verify that both TCP/IP protocol and the proper connector are enabled.
2.
On the control panel, select one of these IP address options:
■
Allow the system to set up a DHCP address.
■
Enter the IP address manually.
3.
Print the Configuration page and keep it for reference.
From Your Computer
To install the system:
1.
Go to
www.xerox.com/drivers
.
2.
Select the product type, the product family, and then select the model.
3.
Click the
Drivers & Downloads
link.
4.
Select
Unix
from the
Operating System
drop-down menu, and then click
Go
.
5.
From the list of files provided, click the
Printer Package for use with CentreWare for
Unix
link. The File Download screen appears displaying information about the download
file.
6.
Click the
Start
button to install the Unix driver.
7.
Print a test page and verify the print quality of the printed page.
Note:
If print-quality problems exist, or your job did not print, see the
User Guide
at
www.xerox.com/office/8510_8560support
or access PhaserSMART Technical Support
through CentreWare IS.
To access PhaserSMART Technical Support:
1.
Launch your web browser.
2.
Enter the system’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Select
Support
.
4.
Click the
PhaserSMART Diagnostic Tool
link to access PhaserSMART.
