System Settings
Phaser® 8510/8560MFP Multifunction Product
4-7
Changing Intelligent Ready Mode
Intelligent Ready mode is an automated system that:
■
Monitors the system’s usage.
■
Warms up the system when you are most likely to need it based on past usage patterns.
■
Activates the Power Saver mode when the system times out.
To turn on/off the Intelligent Ready mode, use one of the following options:
■
The system’s control panel
■
CentreWare IS
Using the Control Panel
To turn Intelligent Ready mode on/off on the control panel:
1.
Press the
System
button.
2.
Select
General Setup
, and then press the
OK
button.
3.
Select
System Controls
, and then press the
OK
button.
4.
Select
Intelligent Ready
.
5.
Press the
OK
button to turn on/off Intelligent Ready.
6.
Select
Exit
, and then press the
OK
button to return to the main menu.
Using CentreWare IS
To select Intelligent Ready mode or to schedule warmup/standby settings using
CentreWare IS:
1.
Launch your web browser.
2.
Enter your system’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
General
folder on the left sidebar, and then select
Warmup
.
5.
Select
Intelligent Ready
,
Scheduled
, or
Job Activated
from the
Warmup Mode
drop-down list to change the setting.
6.
If you selected
Scheduled
in Step 5, make selections for each day’s warmup setting and
standby setting.
7.
Click the
Save Changes
button at the bottom of the screen.
Note:
Although the control panel selections only enable you to turn Intelligent Ready mode
on or off, CentreWare IS enables you to specify particular system Warmup modes and settings.
