Windows 2000, Windows XP, and Windows Server 2003
Phaser® 8510/8560MFP Multifunction Product
3-4
Windows 2000, Windows XP, and Windows Server
2003
This section includes:
■
Preliminary Steps
on page 3-4
■
Quick CD-ROM Install Steps
on page 3-4
■
Other Methods of Installation
on page 3-5
■
Windows 2000, Windows XP, and Windows Server 2003 Troubleshooting
on page 3-9
Preliminary Steps
These preliminary steps must be performed for all systems:
1.
Verify that the system is plugged in, turned
On
, and connected to an active network.
2.
Verify that the system is receiving network information by monitoring the LEDs on the
back of the system or on the CentreDirect External Print Server. When the system is
connected to a functioning network and receiving traffic, its link LED is green, and its
amber traffic LED is flashing rapidly.
3.
Proceed to Quick CD-ROM Install Steps or Other Methods of Installation for the
installation method desired.
4.
Print the Configuration page and keep it for reference.
Quick CD-ROM Install Steps
To install the printer driver:
1.
Insert the
Software and Documentation CD-ROM
into the computer’s CD-ROM drive. If
the installer does not launch, do the following:
a.
Click
Start
, and then click
Run
.
b.
In the
Run
window, type:
<CD drive>:\INSTALL.EXE
.
2.
Select your desired language from the list.
3.
Click
Install Drivers
.
4.
Select one or more of the following options:
■
Install Print and Scan Driver
: Automatically installs both the print and scan drivers.
■
Install Print Driver
: Installs the print driver.
■
Install Scan Driver
: Installs the scan driver.
