Phaser® 6250 Color Laser Printer
E-3
Eyes: If particles get into eye, flush thoroughly with water. Seek medical attention if
symptoms occur.
Skin: Wash thoroughly with soap and water. Seek medical attention if symptoms occur.
Ingestion: Dilute stomach contents with several glasses of water. Seek medical attention if
symptoms occur.
Section 5–Fire Fighting Measures
Flash Point: Not applicable
Fire and Explosion Hazards: Toner is a combustible powder. Like most organic powders, it
can form explosive mixtures when dispersed in air.
Extinguishing Methods: Water, dry chemical, carbon dioxide, or foam.
Fire Fighting Information: Avoid inhalation of smoke. As for any fire, wear protective
clothing and self-contained breathing apparatus.
Section 6–Accidental Release Measures
Spill or leak: Sweep up or vacuum spilled materials and carefully transfer into sealable waste
container. Sweep slowly to minimize generation of dust during clean up. If a vacuum is used,
the motor must be rated as dust tight. A conductive hose bonded to the machine should be used
to reduce static buildup. Clean up residue if necessary with soap and cold water. Wash or dry
clean garments after removing loose toner.
Section 7–Handling and Storage
Handling: No special precautions, when used as intended.
Storage: Avoid high temperatures.
Section 8–Exposure Control - Personal Protection
No special personal protection indicated, when used as intended in Xerox Phaser color
printers.
Threshold Limit Value (TLV): 10 mg/m
3
(total dust)
Permissible Exposure Limit (PEL): 15 mg/m
3
(total dust); 5 mg/m
3
(respirable dust)
Short Term Exposure Limit (STEL): None established
Ceiling Limit: None established
Xerox Exposure Limit (XEL): 2.5 mg/m
3
(total dust); 0.4 mg/m
3
(respirable dust)
Section 9–Physical and Chemical Properties
Appearance/Odor: Black, blue, red, or yellow powders/faint odor
Boiling Point: Not applicable
