Control Panel Error Messages
Phaser® 6180MFP Multifunction Printer
10-32
Control Panel Error Messages
This section describes the messages displayed on the control panel.
Messages About Supplies
Message
Condition/Reason/Action
010-351
Replace Fuser
Time to replace the fuser.
Replace the old fuser with a new one.
010-359
Fuser ID Error
The fuser is not installed correctly or is not working correctly due
to damage or malfunction.
Reinstall the fuser.
010-317
Insert Fuser
The fuser is not installed.
Install the fuser.
093-NNN
XXX Cart. Error
The XXX print cartridge is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the print cartridge.
093-NNN
Check XXX Cart
Sealing tape is still attached to the XXX print cartridge.
Remove the sealing tape from the displayed print cartridge.
093-NNN
XXX Cart. Error
The XXX print cartridge is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the print cartridge.
See
Checking or Managing the Printer with CentreWare IS
on
page 11-6.
094-320
Transfer Unit Error
The transfer unit is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the transfer unit.
CRUM Error
Error 094-330
Reseat Transfer Unit
The transfer unit is not seated correctly.
Reseat the transfer unit.
Install XXX
Print Cartridge
The XXX print cartridge is not installed.
Install the XXX print cartridge.
See
Checking or Managing the Printer with CentreWare IS
on
page 11-6.
Insert
Transfer Unit
The transfer unit is not installed.
Install the transfer unit.
XXX
CRUM Error
Error 093-9NN
The print cartridge needs to be replaced.
Replace the indicated print cartridge, either Yellow, Magenta,
Cyan, or Black.
