Phaser® 4510 Laser Printer
A-6
■
Carry the printer without tilting it.
Caution:
Do not tilt the printer more than 10 degrees to the front/back or right/left.
Tilting more than 10 degrees may lead to consumables inside the printer spilling out.
Note:
The rear side of this printer is heavier than the front. Be aware of this weight
difference when moving the printer.
■
Do not place any food or liquids on the printer.
Caution:
Damage to the printer resulting from improper moving or failure to repackage the
printer properly for shipment, is not covered by the warranty, service agreement, or Total
Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and
Canada. Coverage may vary outside these areas; please contact your local representative for
details.
Safety Symbols Marked on Product
Use caution (or draws attention to a particular component). See the
manual(s) for information.
Hot surface on or in the printer. Use caution to avoid personal injury.
Do not touch the item.
Do not burn the item.
It may take 30 minutes or more for the fuser to cool down depending
on your printer model.
