Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-17
Print Area Is Not Centered on the Paper
The printed area appears outside the margins on the page. Use the following procedure to reset
the margins.
1.
On the control panel, select
Paper Tray Setup
, and then press the
OK
button.
2.
Select the tray you are using, and then press the
OK
button.
3.
Verify that the tray is set to the correct paper size.
4.
If the problem continues, use the Calibrate Margins page to shift the print area on the
paper. The print area appears as a dashed rectangle on the Calibrate Margins page; the
printer does not print outside this rectangle.
a.
On the control panel, select
Troubleshooting
, and then press the
OK
button.
b.
Select
Print Quality Problems
, and then press the
OK
button.
c.
Select
Calibrate Margins
, and then press the
OK
button.
d.
Select
Calibrate Margins Page
, and then press the
OK
button.
e.
Select the appropriate tray to calibrate, and then press the
OK
button.
f.
Follow the instructions on the Calibrate Margins page.
Note:
The leading edge margin specification is 4 mm ± 2 mm. The side edge margin
specification is 4 mm ± 2.5 mm
