Printing on Both Sides of the Paper
Phaser® 4510 Laser Printer
3-23
Printing on Both Sides of the Paper
This section includes:
■
Automatic 2-Sided Printing Guidelines
on page 3-23
■
Binding Edge Options
on page 3-24
■
Selecting 2-Sided Printing
on page 3-24
Note:
For information about manual two-sided printing, go to the Online Support Assistant at
www.xerox.com/office/4510support
.
Automatic 2-Sided Printing Guidelines
Automatic 2-sided printing is available from all trays. Before printing a 2-sided document,
verify the following requirements:
■
The printer must have a duplex unit installed. The duplex hardware comes standard on the
Phaser 4510DX and 4510DT configurations, and it is a option that is available for the
Phaser 4510B and 4510N.
■
The paper must be a supported size for the tray. For a list of supported paper sizes, see
Supported Paper and Media
on page 3-3. For a list of paper types and weights, print the
Paper Tips page:
a.
Select
Information
, and then press the
OK
button.
b.
Select
Information Pages
, and then press the
OK
button.
c.
Select
Paper Tips Page
, and then press the
OK
button.
The following paper and media cannot be used for 2-sided printing:
■
Transparencies
■
Envelopes
■
Labels
■
Any die-cut specialty media, such as business cards
See also:
Supported Paper and Media
on page 3-3
Printer Configurations
on page 1-4
