Xerox Legacy 4590 System Administration Manual Download

Page: 363 / 402

Xerox 4590/4110 Copier/Printer System Administration Guide

9-3

9. Troubleshooting

You cannot delete documents from the Printer window.

Notes and Restrictions

The following are the notes and restrictions for using SMB:

Configuration on the Machine

•

Take maximum care with the IP address settings. IP

addresses are managed throughout the system as a whole.

The configuration should be performed only after consulting

with your network administrator.

•

Subnet Mask and Gateway addresses may be necessary

depending on the network environment. Confirm with the

network administrator and set up the necessary items.

•

When the port status is set to Enable, it sometimes

automatically switches to Disable if the machine has

insufficient memory. If this happens, either set an unused port

to Disable, or adjust the assigned memory size.

•

Adjust the receiving buffer

SMB (Spool)

size according to

usage. When the receiving buffer

SMB (Spool)

size is smaller

than the transmitted data, the machine may not be able to

receive the data.

Configuration on the Computer

•

Take maximum care with the IP address settings. IP

addresses are managed throughout the system as a whole.

The configuration should be performed only after consulting

with your network administrator.

•

When performing network settings (IP address, etc.) on a host

under the NIS (Network Information Service) management,

consult with the NIS administrator.

Cause

Check point

Remedy

You are trying to delete all print

data displayed in the

Printer

window. (Only the system

administrator is allowed to do this

task.)

Confirm whether you are trying to

delete the print data from the

Printer

menu. (In Windows OS:

Clear Print Jobs

menu.)

Select the print data to be deleted,

and delete from the

Document

menu in the

Printer

window.

(

Cancel Printing

menu.)

The print data has a different

owner.

Confirm if the name displayed as

the Owner for the selected print

data and the login name for the

user to Windows are the same.

of the document owner and delete

the print data.

Service Pack 4.0 or later is not

installed.

(For Windows NT 4.0.)

Confirm the Service Pack version

which is displayed when Windows

NT is starting up.

Install Service Pack 4.0 or later.

Summary of Contents for Legacy 4590



















































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4590

Reviews:

Related manuals for Legacy 4590

Brands by name

Popular brands

Xerox Legacy 4590, System Administration Manual

Search results

Summary of Contents for Legacy 4590

Reviews:

Related manuals for Legacy 4590

Brands by name

Popular brands