D
Dooccuum
meenntt FFaaiillss ttoo PPrriinntt
Probable Causes
Solutions
Selected tray has wrong paper size loaded.
When the user receives a message indicating that the
device requires attention:
1 Log in as administrator and access Device
Management. For details, refer to the
System
Administrator Guide
.
2 For the tray indicated, load the correct size paper.
3 Touch
Close
.
4 Exit Device Management. For details, refer to the
System Administrator Guide
.
The kiosk is not installed on the network properly.
Ensure that the kiosk is connected to the network.
Refer to the
System Administrator Guide
.
KKiioosskk iiss M
Maakkiinngg U
Unnuussuuaall N
Nooiisseess
Probable Causes
Solutions
One of the trays is not installed correctly.
Open and close the tray from which you are printing.
There is an obstruction or debris inside the kiosk.
Power off the kiosk and remove the obstruction or
debris. If you cannot remove it, contact your
Xerox
®
service representative.
A
Auuttoom
maattiicc 22--SSiiddeedd PPrriinnttiinngg PPrroobblleem
mss
Probable Causes
Solutions
Unsupported or incorrect paper.
Ensure that you are using the correct paper. Do not
use transparencies, envelopes, labels, or reloaded
paper for automatic 2-sided printing. For details, refer
to
Supported Paper Sizes and Weights for Automatic
D
Daattee aanndd TTiim
mee A
Arree IInnccoorrrreecctt
If a Set Time Error appears on the kiosk touch screen, set the time. The steps below can be performed
by an administrator. For details, refer to the
System Administrator Guide
at
.
Xerox
®
Instant Print Kiosk
User Guide
81
