User Controls
24
Xerox DP1015 User’s Guide
Display Menu (VGA Mode)
Frequency
—Changes the display data frequency to match the
frequency of your computer’s graphics card. If vertical flickering
lines appear on the image, adjust the frequency until they
disappear.
Phase
—Synchronizes the signal timing of the display with the
timing of your computer’s graphics card. If the image flickers or is
unstable, adjust the tracking until the image is stable.
V Position
—Moves the image up and down on the screen.
H Position
—Moves the image left and right on the screen.
Proportion
—Switches the length-to-width aspect ratio between
4:3 and 16:9. The correct proportion to select is based on the type
of video source you are using. If the image seems to be distorted or
stretched, change the proportion.
User Color
—Select
Yes
to adjust individual colors manually. The
menu on the left appears. Select
No
to adjust the color
temperature. The menu on the right, with the
Color Temp
control,
appears.
User Red, User Green, User Blue
—Adjust the amount of colors in
the Display image.
Color Temp
—Adjusts the color temperature range. Higher
temperatures make the screen look colder, lower temperatures
make the screen look warmer. The available color temperature
range is between 6100K and 9300K.
Summary of Contents for DP 1015
Page 1: ...DP 1015 projector user s guide...
Page 2: ...Xerox DP1015 projector user s guide...
Page 43: ...Maintenance 38 Xerox DP1015 User s Guide...
Page 46: ...05 0603 000...
