Hitachi CP-X4020 User Manual Download

Page: 1 / 112

Projector

CP-X4020

User's Manual (detailed)
Operating Guide

Thank you for purchasing this projector.

Before using this product, please read all manuals for this

product. Be sure to read “

Safety Guide

” ﬁ rst. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are
described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.

Please refer to the pages written following this symbol.

• Mac

is a registered trademark of Apple Inc.

• Windows

is a registered trademark of Microsoft Corporation in the U.S. and/or

other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.

All other trademarks are the properties of their respective owners.

NOTICE

This entry notices of fear of causing trouble.

Summary of Contents for CP-X4020

















































































































Search results

Summary of Contents for CP-X4020

Reviews:

Related manuals for CP-X4020

Brands by name

Popular brands

Hitachi CP-X4020, User Manual

Search results

Summary of Contents for CP-X4020

Reviews:

Related manuals for CP-X4020

Brands by name

Popular brands