3/99
Xerox DocuPrint P1202 Service Manual
4-31
Repair Procedures
REP 4.5.3 Erase Lamp
Removal
1 Disconnect the AC Power Cord and remove the paper tray.
Figure 4.5.3a
Transfer Guide.
2 Remove the Printer Cartridge (REP 4.5.1).
3 Remove the System Controller PWB (REP 4.6.2).
4 Remove the Control Panel Harness Cover (REP
4.1.2).
5 Disconnect the Control Panel Harness from J1 on the
Control Panel
6 Remove the Main Cover (REP 4.1.2).
7 Remove the Engine PWB (REP 4.6.1).
8 Remove the four screws that secure the Transfer
Guide (Figure 4.5.3a). Remove the Transfer Guide.
9 Disconnect the harness from CN1 on the Erase Lamp
Assembly (Figure 4.5.3b).
10 Remove the two screws that secure the Erase Lamp Assembly, and remove the assembly.
Figure 4.5.3b Erase Lamp Removal.
Replacement
1 Assemble in reverse order.
2 When reinstalling the Printer Engine PWB on the base frame, use care not to bind the four
sensor actuators (Paper Out, Paper Registration, Exit, and Printer Cartridge/Front Cover).
8
8
8
dp8_074
8
Printer
Bottom
View
10
10
9
dp8_071
Printer
Bottom
View
www.printcopy.info
www.printcopy.info
