3/99
Xerox DocuPrint P1202 Service Manual
1-3
Service Call Procedures
1.2 Initial Actions
1 Question the operator and verify the problem.
2 Check that the printer paper path is clear of foreign matter such as staples, paper clips, and
paper scraps.
3 After you have identified the problem symptom, check the following items:
• The printer is connected to a wall power outlet, and the outlet is supplying the correct volt-
age.
• The printer power cord is not frayed or broken.
• The printer is correctly grounded / earthed.
• The printer is in an appropriate operating environment, with no extremes of heat, humidity,
or dirt.
• The printer is not exposed to direct sunlight.
• The printer is on a level and stable surface.
1.3 Corrective Actions
1 If the printer has an obvious failure or fault, you can go directly to the appropriate Repair
Procedure (Section 4) or Repair Analysis Procedure (RAP) (Section 7) and begin corrective
action.
2 If the fault is not obvious, follow the Entry Level RAP (Section 7) to identify the problem and begin
corrective action.
3 After all corrective actions have been made, perform Final Actions.
www.printcopy.info
www.printcopy.info