Xerox DocuPrint N4525, User Manual

Page: 46 / 115

32
DocuPrint N4525 Network Laser Printer
For the Windows 2000 and Windows NT (PS/PCL5e) operating systems:
1.
In your application, select File and then Print .
2.
Select the Xerox N4525 printer driver.
3.
When the Print dialog box opens, click Properties .
4.
Click the Advanced button.
5.
Under Printer Features , select Finisher from Output Bin .
6.
Select a Staple Option from the drop-down list:
■
None
■
Front
■
Rear
■
Dual
7.
Click the OK button to save the properties.
8.
Send the job to the printer.
For the Windows NT (PCL6) operating system:
1.
In your application, select File and then Print .
2.
Select the Xerox N4525 printer driver.
3.
Open the Properties dialog box.
Note
If the Status tab appears black, you are running in Auto
Configure mode. If the Status tab appears gray, you must
configure the printer (on the System Configuration tab) to
include the Finisher.
4.
Select the Page Setup tab.
5.
Select the Advanced tab.
6.
Under Printer Features , select Staple .
7.
At the bottom of the dialog box, select a staple option:
■
No Staple
■
Position 1
Output