Xerox DocuPrint N4525, User Manual

Page: 106 / 115

92
DocuPrint N4525 Network Laser Printer
Additional Information: The results obtained from a Xerox’ sponsored
Chronic Toner Inhalation Study, demonstrated no lung change in rats for the
lowest (1mg/m
3
) exposure level, the level most relevant to potential human
exposure). A very slight degree of fibrosis was noted in 25% of the animals at
the middle (4mg/m
3
) exposure level, while a slight degree of fibrosis was noted
in all the animals at the highest (16 mg/m
3
) exposure level. These findings are
attributed to "lung overloading", a generic response to excessive amounts of
any dust retained in the lungs for a prolonged period. This study was
conducted using a special test toner to comply with EPA testing protocol. The
test toner was 10 times more respirable than commercially available Xerox
toner, and would not be functionally suitable for Xerox equipment.
Section 4 - Physical Data
Appearance/Odor: Black powder / faint odor
Boiling Point: Not Applicable
Solubility in Water: Negligible
Evaporation Rate: Not Applicable
Vapor Density (Air = 1): Not Applicable
Volatile: Not Applicable % (Weight) Not Applicable % (Volume)
Softening Range: 43.3 - 60 degrees C (110 - 140 degrees F)
Melting Point: Not Applicable
Specific Gravity (H
2
O = 1): ~1
Vapor Pressure (mm Hg) : Not Applicable
pH: Not Applicable
Section 5 - Fire and Explosion Data
Flash Point (Method Used): Not Applicable
Flammable Limits: LEL: Not Applicable, UEL: Not Applicable
NFPA 704: Health - 0, Fire - 3, Reactivity - 0
Extinguishing Media: Water, dry chemical, carbon dioxide or foam.
Special Fire Fighting Procedures: Avoid inhalation of smoke. Wear protective
clothing and self-contained breathing apparatus.
Fire and Explosion Hazards: Toner is a combustible powder. Like most
organic materials in powder form, it can form explosive mixtures when
dispersed in air.
Specifications