Xerox DocuPrint N2825, Information Manual

Page: 21 / 124

Set An IP Address
Chapter 2: Connecting to Your Network
❖
2-7
Static Addressing
The printer is assigned a TCP/IP address by a network
administrator. The address can be set at the control panel
or by using ARP and telnet commands.
Setting from the Control Panel
Perform these steps to set the Static IP Address at the
control panel:
1 Press Menu Up or Menu Down until you see:
M e n u s
E t h e r n e t M e n u
2 Press Item Up or Item Down until you see:
E t h e r n e t M e n u
I P A d d r e s s R e s .
3 Press Value Up or Value Down . You will see:
I P A d d r e s s R e s . =
S t a t i c
4 Press Enter . You will see:
E t h e r n e t M e n u
I P A d d r e s s R e s .
5
Press
Item Up
or
Item Down
until you see:
E t h e r n e t M e n u
I P A d d r e s s
If you use the Xerox CentreDirect External Print Server
(External Ethernet Adapter) to connect your printer to the
network, you cannot use the control panel to set a Static IP
Address. Use the ARP and telnet procedures that are described
in the sections for Windows or Unix Operating Systems.