![background image](http://html1.mh-extra.com/html/xerox/docuprint-c621/docuprint-c621_setup-manual_4125994008.webp)
vi
Using this Guide
Organisation of this Guide
This manual consists of five chapters. A brief introduction of each chapter is provided
below.
Chapter 1 Setting up the Printer
This chapter explains how to look for a suitable installation environment, what to check for
the bundled products, and how to check that the printer has been properly set up.
Chapter 2 Connecting the Interface Cables
This chapter explains how to connect the printer to the computer (when using it as a local
printer) and how to connect the printer to a network (when using it as a network printer).
Chapter 3 Network Settings (Quick Setup)
This chapter describes the procedures to define the network settings so that the printer can
be used in the TCP/IP, SMB (Windows network) or AppleTalk environment.
Chapter 4 Configuring the Computer
This chapter explains how to install the necessary software to the computer so that the
printer can be used.
Appendix
This section contains the following information:
•
Control Panel Menu (Abstract)
Explains the the control panel schematically.
•
About the Software Pack CD-ROM
Explains the folder structure of the Software Pack CD-ROM bundled with the printer.
•
When Using the Printer
Explains information that you can refer to after the printer is installed.
•
Glossary
Summary of Contents for DocuPrint C621
