26
1
1.7 Assembling the Optional Products (Part 2)
There are three screws near the top of the
right cover of the printer. Unscrew them.
Slide the right cover to the back of the printer
( ). Flip it down ( ) and remove it from the
printer.
Push out the ejector levers at the both ends of
the memory slot.
Hold the two sides of the memory and fit the
two cutouts with the two protruding parts on
the slot and push it straight in.
Some parts of the PCB may be
very hot. Do not touch the PCB
as this may damage the board.
After you have inserted the memory, push in
the ejector levers to fasten the memory to the
slot.
To install the hard disk, skip the
next two steps and proceed with
the installation.
Summary of Contents for DocuPrint C621
