![background image](http://html1.mh-extra.com/html/xerox/docuprint-c621/docuprint-c621_setup-manual_4125994045.webp)
Setting up the Printer
1
23
1.6 Loading Paper
After aligning the edges of the paper, align the
mark on the horizontal guide with the
appropriate paper size mark.
•
Make sure that the vertical
paper guide stopper is in the
right hole.
•
If the vertical paper guide is
out of position, the paper size
may not be detected. When this
happens, slide the vertical
guide to the left, then re-align
it with the paper scale.
Push the paper tray firmly into the printer.
Do not push in the tray with
excessive force.
When installing the optional 2-tray module, load
paper in the paper tray following the same
procedure.
You can load up to the limit
shown on the maximum (MAX) fill
line found at the back of the tray.
Do not load paper on the grey
tab as shown in the diagram. The
tab prevents paper from being
fed in the slanted position.
Proceed to install the optional additional
memory or hard disk if you have purchased
them.
Otherwise, proceed to "1.8 Switching on the
Power and Confirming the Operation".
Summary of Contents for DocuPrint C621
