![background image](http://html1.mh-extra.com/html/xerox/docuprint-c621/docuprint-c621_setup-manual_4125994035.webp)
Setting up the Printer
1
13
1.2 Assembling the Optional Products (Part 1)
The connector cover is located at the back of
the printer. Press the tab at the top of the cover
and pull to remove it.
Firmly connect the two cables dangling from
the 2-tray module to the two connector ports on
the printer.
•
The two connectors differ in
size. Make sure you connect
them to the correct ports as
shown in the diagram..
•
Do not press too hard on the
connectors as you may hurt
your fingers.
Press the connector cover ( ) at the side of
the 2-tray module. While you are still pressing
on the connector cover of the 2-tray module,
push in the connector cover of the printer ( )
along the guides until it clicks.
Paste the label bundled with the 2-tray module
on the location as indicated in the diagram.
Summary of Contents for DocuPrint C621
