Xerox DocuPrint C621, Setup Manual

Page: 19 / 117

xvii
This equipment is certifed as a Class 1 laser product under IEC825 (1984). This means that the
machine does not emit hazardous laser radiation. Since radiation emitted inside the machine is
completely confined within the protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation. Do not remove any covers except
those that have been specifically instructed in the manual. This may result in unnecesary laser
radiation.
Do not place any heavy object on the machine. An off-balance machine can fall over or the heavy
object can fall, causing injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When removing jammed paper, make sure that no pieces of torn paper are left in the machine. A
piece of paper remaining in the machine can cause fire.
If a sheet of paper is wrapped around the heat roller, or when clearing a jammed paper that is
difficult or impossible to see, do not try to remove it by yourself. Doing so can cause injuries or
burns. Switch off the machine immediately, and contact your Xerox Customer Support Centre.
• Refer to this manual for procedures on clearing paper jams, and how to resolve other troubles that
may occur.
Never throw a toner cartridge into an open flame. Toner remaining in the cartridge can cause an
explosion and you can get burnt.
Other Precautions
Notes on Handling Consumables