6.1 Replacing Consumables
81
About the Custom Mode
When the toner in a toner cartridge runs out, “Replace Toner Cartridge” is displayed on the
printer.
When you want to use the printer in the custom mode, follow the procedure below to set the
custom mode before replacing the new toner cartridges.
Important
• When using the printer in the custom mode, the printer’s basic functions and performance may be
degraded below the range of guaranteed quality that is possible when using our recommended
products. Using the printer continuously in the custom mode may cause malfunctions. If this is the cause
of a malfunction, repairs are not done under warranty.
Note
• When returning the setting to the normal mode, select [Off] in step 4 below.
1.
Press the < > button and the <Eject/Set> button simultaneously.
2.
Make sure that [Non-genuine] is displayed, then press the < > button or the <Eject/
Set> button.
3.
Make sure that [Toner] is displayed, then press the < > or <Eject/Set> button.
4.
Press < > button to select [On], then press the <Eject/Set> button.
5.
Press the <Menu> button.
Replacing the Drum Cartridge
This section describes procedures for handling, storing and replacing the drum cartridge.
Caution on Handling the Drum Cartridge
When handling the drum cartridge, take note of the following points:
WARNING
• Never throw a drum cartridge into an open flame. It can cause an explosion and you can
get burnt.
• Do not subject it to direct sunlight or strong light.
• Do not touch the drum surface (blue part). Make sure that nothing touches or scratches
the drum surface.
• To avoid degradation of print image quality, keep the drum cartridge level.