Xerox DocuPrint C2100, Quick Reference Manual

Page: 5 / 206

Preface
3
IE
IE
Preface
Thank you for choosing the DocuPrint C2100. This guide explains how to use this printer and the
precautions that must be followed during operation. To get the most out of this printer, and to use it correctly
and effectively, please read this guide thoroughly before use.
After reading this guide, keep it handy for future reference.
This guide is written with the assumption that you have basic knowledge of computers and network
environments.
In this manual, safety instructions are preceded by the symbol .
Always read and follow the instructions before performing the required procedures.
Remember also to read the “Safety Notes” in this manual.
This product is a “Class I Laser System” that does not emit dangerous laser beam. Operate the machine
according to the instructions in the manual. Do not carry out any operation not mentioned in the manual.
Otherwise, it may lead to unforeseen accident or machine breakdown.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to the International Standard for Electromagnetic Interference (CISPR Publ. 22) and
Radiocommunication Act 1992 in Australia/New Zealand. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Changes and modifications to this equipment not specifically approved by Fuji Xerox may void the user’s
authority to operate this equipment.
This product is certified by the following Agency using the Safety standards listed.
Agency Standard
NEMKO IEC60950-1 Edition 1 (2001)
This product was manufactured under a registered ISO9001 system.