Xerox DocuPrint C2100, Quick Reference Manual

Page: 30 / 206

28
5 List of Menu Items on the Control Panel
5 List of Menu Items on the Control Panel
For details on how to operate the control panel, refer to the User Guide “4 Setting on the Control Panel”.
• Main operations and buttons on the control panel
Note
•
indicates items that can be set when optional accessories are installed.
c : 550 Sheet Feeder d : Additional memory e : Network expansion card f : Duplex Unit
• * indicates default value.
Continued on next page
Display/Close the Menu screen <Menu> button
Switch between the menu levels
< > button (moves one level downwards) or < > button (moves one level
upwards)
Switch between menu or items in the
same level
< > button (displays the previous menu or item) or < > button (displays
the next menu or item)
Move the cursor (_) of the setting value to
the right or left
< > button (moves to the right) or < > button (moves to the left)
Confirm setting <Eject/Set> button
Reset settings to default value
Press < > and < > button at the same time
Report / List
Meter Readings Meter 1, Meter 2, Meter 3, Meter 4
Printer Settings, Panel Settings, PCL Font List, PCL Macro List, Job History, Error History, Print Meter,
Demo Print - A4 Sample, * Demo Print - 2-Sided Sample, * Stored Documents
1
2
LPD, Port9100, IPP
StatusMessenger, InternetServices
Admin Menu Ethernet Auto *
,
10Base Half , 10Base Full , 100Base Half ,
100Base Full
TCP/IP
Get IP Address DHCP / Autonet *, BOOTP,
RARP, DHCP, Panel
IP Address,
Subnet Mask,
Gateway Address
000.000.000.000 *
Protocol
Enable *, Disable
IP Filter
Initialize NVM
Bi-directional
Wired Network
3
3
3
IPX/SPX
3
Ready to print
SMB (NetBEUI), FTP,
3
3
Bonjour (mDNS),
HTTP - SSL/TLS 3
*
E-mail Printings,
* [Stored Documents] is displayed when [RAM Disk] is set to [Enable] and the optional additional memory is installed.
1 * [Demo Print - 2-Sided Sample] is displayed when the optional Duplex Unit is installed.
<Menu> button
No.n / Address
No.n / Mask
No.n / Mode
000.000.000.000 *
Off *, Accept, Reject
n: 1 - 5
Ready to init
Enable *, Disable
NetWare
NetWare IP Enable *, Disable
NetWare IPX
Enable *, Disable
SNMP
SNMP (UDP/IP)
Enable *, Disable
Enable *, Disable
3
Auto *, Ethernet 2, Ethernet 802.3,
Ethernet 802.2, Ethernet SNAP
SNMP
3
(IPX)
3 * The security function cannot be used on models
that are sold in China (TL300419).
To switch the layer < > < >
in a menu
To switch menus and < > < >
items in the same layer
To configure the settings <Eject/Set>
ParallelSettings
, SMB (TCP/IP),
3