Xerox DocuPrint 96/4635/180 IPS, Troubleshooting Manual

Page: 15 / 53

XEROX DOCUPRINT 96/4635/180 IPS TROUBLESHOOTING GUIDE 2-1
2. 2 Fault masking
This chapter describes the behavior of the 96/4635/180 IPS while
printing with fault conditions in existence.
The DocuPrint 96, 4635, and 180 IPS enables you to continue
printing while certain faults or conditions exist in parts of the printer
not currently in use. Such faults or conditions are said to be masked.
If, for example, you are printing a job using feeder tray 1 and stacker
bin A, the printer continues printing even if feeder tray 2 is jammed or
if stacker bin B is full.
When there is a masked fault or condition, the Hint icon (a light yellow
circle with an asterisk inside) appears on the printer console and the
Attention light goes on. A message, preceded by an asterisk, also
appears in line 3 of the message area of the printer console. To
display the area containing the masked fault (for example, the
location of the paper jam), touch the Fault List icon (shown below) on
the printer console to display the Fault List screen.
Figure 2-1. Fault List icon