Xerox DocuPrint 96/4635/180 IPS, Troubleshooting Manual

Page: 19 / 53

CLEARING PAPER MISFEEDS AND JAMS
XEROX DOCUPRINT 96/4635/180 IPS TROUBLESHOOTING GUIDE 3-3
4. Press the green lever to unlatch the paper feeder assembly.
5. Remove and discard any partially fed paper. Make sure the
paper supply is neatly stacked and the stack is not higher than
the MAX line on the length guide. Make sure the length guide
is firmly touching the back edge of the stack.
6. Latch the paper feeder assembly by pressing the green dot until
the assembly clicks into place.
7. Slide the tray back into the printer until the tray latches and
press the Continue button to resume printing.
8. Discard any pages sent to the sample tray or unused stacker
tray when the paper jam was detected.
Note: If the 96/4635/180 IPS does not continue printing after a
paper tray fault or after paper is loaded, pull out the tray, then push it
back in. The system should resume printing.