Xerox DocuPrint 96/4635/180 IPS, Troubleshooting Manual

Page: 45 / 53

XEROX DOCUPRINT 96/4635/180 IPS TROUBLESHOOTING GUIDE 5-1
5. 5 Correcting stacker problems
This chapter describes stacker problems other than paper jams. It
suggests corrective actions when papers are thrown around the
stacker or the bin. (See “Clearing paper misfeeds and jams” for
stacker paper jams.)
Symptom Probable cause Action
Papers are thrown around the
stacker Someone unloaded paper by
opening the top cover of the
stacker bin. Unload the bin following the normal procedure.
See “Unloading Stacker bin” in the
Xerox
DocuPrint 96/4635/180 Guide to Performing
Routine Maintenance
.
Paper stack falls over or slides
around the bin Excessive paper curl Try adjusting for paper curl (See the “Paper
curl and paper jams” section in the “Clearing
paper misfeeds and jams” chapter in this
document.)
Printing stops and the printer
console displays a message
indicating that an incorrect
paper size is loaded in a
feeder tray. Incorrect paper size, a misfeed
in feeder trays 3 or 4, or a
damaged sheet. 1. Check the paper in the indicated tray.
2. Check trays 3 and 4, and remove any
misfed sheets.
3. If the paper is not the correct size, load
the correct size paper or select another
feeder tray containing the correct paper
size.
If the paper size is correct, press the
Continue button to resume printing.