WASTE CONTAINERS
XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
6-3
5. Discard the waste material and container according to the
instructions on the label.
6. Grasp the new, empty container with both hands, one hand on
the handle and one on the container tab. Lift the front of the
container over the notch at the front of the compartment, so that
the notch slides into the groove running underneath the
container.
7. Make sure that the container is pushed all the way into the
compartment.
8. Close the printer doors.
9. Dispose of the dropcloth.
Checking and replacing the dry ink waste container for 92C
Waste dry ink is transported into the sealed waste container located
in a compartment in the lower left corner at the rear of the printer. The
waste material is a mixture of black and color toner and developer,
and is not reusable.
When the dry ink waste container is approximately three quarters full,
the Attention light turns a steady yellow and the message
DRY INK
WASTE BOTTLE IS ALMOST FULL
displays on the printer console.
Replace the container as soon as possible. Once the container is full,
the printer stops and does not resume printing until the container is
replaced. The Attention light turns a modulated yellow and the
message
DRY INK WASTE CONTAINER FULL
displays on the
printer control console.
Summary of Contents for DocuPrint 92C NPS
