FUSER LUBRICANT AND PRESSURE ROLL WIPER
4-6
XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
6. Locate the pressure roll wiper assembly and release the top rod
by pulling upward as shown.
7. Remove the lower rod from the springs and lift the wiper
assembly away.
8. Place the used wiper and its drip pad in the plastic bag that
came with the new wiper and dispose of the bag in a trash
receptacle.
9. Rotate the pressure roll while wiping the dirt off with a clean
cloth. Discard the cloth in the trash receptacle when you are
finished.
Summary of Contents for DocuPrint 92C NPS
