Xerox DocuPrint 92C NPS, Maintenance Guidance

Page: 17 / 62

XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 2-1
2. 2 Output trays
Your print jobs are sent to printer output trays, which you must
unload. You can unload each of the output trays while the system is
printing. How you do so, however, depends on the type of tray. This
chapter discusses how to check and unload the various types of trays
available.
In all cases, if the printer has stopped due to a full output tray and
does not resume automatically when the tray is emptied, press the
Continue button on the printer control console.
Checking and unloading dual stacker trays
When a stacker tray is full, the following occurs:
•
The Tray Full indicator lights on the appropriate stacker tray.
•
The Attention light shines steadily.
•
The printer control console displays a message indicating which
output tray is full.
•
The picture on the graphic display shows the location of the full
tray.
•
If you select only one tray, the printer stops when that tray is full.
•
If you select both trays and the first tray is not emptied by the
time the second output tray is full, the printer stops and displays
the message that both output trays are full.
Each stacker tray holds 750 sheets of 20-pound or 80gsm paper.