Xerox DocuPrint 4850 NPS, Configuration Manual

Page: 230 / 276

MANAGING FONTS
10-2 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Example Installing all fonts from a CD-ROM:
Note: If a package number and format is unknown, the following
message is displayed:
Install Fonts from Floppy
Use the Install Fonts from Floppy command to install PostScript fonts
onto the Printer Controller from a floppy diskette.
Example Installing PostScript fonts from a floppy diskette:
Note: If the diskette differs in density from the previous diskette or
from the default format, the following messages may appear:
fd0: read failed (40 1 0)
fd0: bad format
fd0: read failed (40 0 1)
fd0: bad format
The operating system eventually determines the correct format
unless the format is unrecognizable or the diskette is damaged.
Note: The message “No font files found on floppy” appears if no
appropriate fonts are found on the diskette. “READ FAILED [nn nn
nn]” and “fd0:CRC error blk nnn” messages may indicate that the
diskette is damaged.
Indicates the pattern of fonts you want to install. The asterisk (*)
character matches any string of characters. You can enter * to install
all fonts, or <pattern> to install all font files of the specified pattern.
PS-admin>
Install Fonts From CDROM *
Do you want a confirmation prompt for each file?
n
Searching the entire CDROM, please wait...
Cannot install a numbered package <pkgnum> from this CDROM
Access level Administrator
Syntax Install Fonts From Floppy
Argument None
PS-admin>
Install Fonts From Floppy
Floppy disk inserted? ("No" to quit):
y
Do you want a confirmation prompt for each file?
y
Copying files from floppy - please wait ...