Xerox DocuPrint 4850 NPS, Configuration Manual

Page: 198 / 276

MANAGING ACCOUNTING FILES AND LOGS
9-2 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
There are two versions, referred to as “version 2” and “version 3.”
They are the same, except that version 3 has an additional 13
attributes logged, and it displays multiple media. Version 2 is the
default format that has been used on all NPS systems prior to release
1.6.1. The version is selected during installation or by using the
Configure utility to change the jpm.accounting.format parameter. The
version your system is using is indicated by the number “2” or “3” at
the beginning of a line.
The order and meaning of the fields in a job record for both versions
2 and 3 is shown below. They are the same except for the media
attribute.
JobID=<job ID number>
Refers to the job ID number
SenderName=<sender name>
Refers to the job sender name that appears on the header page
that prints with the document.
DocumentName=<document name>
Refers to the document name that appears on the header page
that prints with the job.
DocumentDate=<document date>
Refers to the document date that appears on the header page
that prints with the job.
DocumentFormat=<“PS” | “PS2” | “ASCII” | “PCL”>
Refers to whether the format of the document is PostScript level
1, PostScript level 2, ASCII,or PCL
CopyCount=<number of copies>
Refers to how many copies of the document were printed.
Priority=<priority number>
Refers to the job priority.
PageRange=<first page number, last page number>
Refers to the range of pages of the document that were printed.
Plex=<number>
Refers to whether the document printed simplex (on one side of
each page) or duplex (on both sides of each page).
•
•
• “1” =simplex
“2” =duplex
“3” =tumble duplex
Orientation=<number>
Refers to whether the orientation of the document is portrait or
landscape.
•
•
•
• “0” =portrait
“1” =landscape
“2” =inversePortrait
“3” =inverseLandscape
Resolution=<“240” | “300” | “600”>
Refers to the printing resolution
OutputBin=<“256” | “257” | “258”>
Refers to the output bin used for the document.
•
•
•
“256” =Sample Tray (top tray)
“257” =Stacker group 1
“258” =Stacker group 2