Xerox DocuPrint 4850 NPS, Configuration Manual

Page: 177 / 276

XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 8-1
8. 8 Checking system status and
displaying billing meters
This chapter describes commands that let you monitor various
aspects of printer status, including billing meters.
•
The List Volumes command lists the amount of disk space
available for each partition of the disk.
•
The Show Status command shows the status of the printer. The
amount of detail shown depends on the access level from which
you issue the command.
•
The List Executives command lets you determine which clients
are connected to your DocuPrint NPS as remote operators.
This command also lists current local sessions.
•
The Display Billing Meters command displays the available
billing meters.
•
The Print Billing Report command prints billing meter data.
The sections in this chapter provide the syntax and arguments for
these commands.
List Volumes
Use the List Volumes command to list the amount of disk space
available for each partition of the disk.
Note: When the hard disk partition used for spooling is full, it no
longer accepts jobs from clients. Use this command to check the
partitions frequently; when it approaches 80 percent, delete jobs,
release held jobs, or dump accounting logs.
Access level Administrator or operator
Syntax List Volumes
Arguments None