Xerox DocuPrint 4850 NPS, Configuration Manual

Page: 138 / 276

SETTING SYSTEM DEFAULTS
5-4 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Syntax Set Tray <n> <size> <type> <color> <weight>
Set Tray <n> Default
Arguments <n>
Indicates the number of the paper tray, for example “1” or “2.”
<size>
Indicates the size of the media. If you specify “default,” the type,
color, and weight are set to the default media, and the size
matches the tray setting.
Acceptable size values for the models 4050, 4090, 4850, 4890,
or 92C are: “USLetter,” “USLegal,” “A4,” or “nxn”. Acceptable
custom paper sizes (nxn specified in millimeters) range from 8 x
10" (203 x 254mm) to 8.5 x 14" (216 x 356mm).
Acceptable size values for the models 96, 4635, or 180 are:
“USLetter,” “USLegal,” “USLedger,” “Tabloid,” “A3,” “A4,” or
“nxn.” Acceptable custom paper sizes (nxn specified in
millimeters) range from 7 x 10" (178 x 254mm) to 17 x 14" (432
x 356mm).
<type>
Sets the media type. Use a text string to specify the media type.
Enter double quotation marks (" ") to leave the string empty.
Valid types for DocuPrint NPS systems include “transparency,”
“plain,” “drilled” and any custom type defined by a text string.
Note: When you specify a media type from a client, and you
use the prefinish value, the word “plain” is equivalent to a blank
media type.
Additional valid types for the 96, 4635 and 180 include “precut,”
“drilled-precuttab,” “#hole,” and “ordered#.” The symbol # is
replaced by a number to indicate either the number of holes or
the number of items in the ordered set.
<color>
Indicates the color of the media. Use a text string to specify the
color.
<weight>
Indicates the weight of the media in grams per square meter
(gsm). “0” indicates no preference.
Default
Sets tray n to the appropriate size (USLetter, Legal, etc.) to
match the way the hardware has been set. The type, color and
weight will be set to match the values of the default media.
Example This example sets feeder tray 1 to USLetter, white, no type indicated,
no weight preference:
PS-op>
set tray 1 usletter "" white 0
Tray 1 set to USLetter::white