Xerox DocuPrint 180 IPS Series, Installation Planning Manual

Page: 53 / 200

CONTROLLER SPECIFICATIONS AND REQUIREMENTS
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 5-5
Processor clearance When you place your workstation processor on a table top, make
sure to allow at least 6 inches / 15.2 cm of unobstructed space at the
rear and both sides of the processor. Do not allow any piece of
equipment to blow warm air into the air-intake vents of the processor.
The following illustration shows fan and vent locations on the Ultra 2
processor.
Figure 5-3. Sun Ultra 2 fan and vent locations to keep clear
1 Vent
2 Fan
3 Vent
Caution: Do not place a monitor with a base larger than the
processor on top of the unit. Do not block any fan or vents on the
sides or rear of the processor.
2
3
1