Xerox DocuPrint 180 IPS Series, Installation Planning Manual

Page: 150 / 200

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
E-8 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
JOBTRLR None Installation
preferences 1 to 8-character
alphanumeric string Name of OUTPUT
statement that defines form
and page definition used to
format job trailer separator
pages.
LOGMODE N/A Not applicable for TCP/IP-
attached printer.
LUNAME N/A Not applicable for TCP/IP-
attached printer.
MESSAGE None Installation
preferences 1 to 8-character
alphanumeric string Identifies OUTPUT
statement that specifies
form and page definitions
used to format and print
messages.
MGMTMODE Installation
preferences OUTAVAIL or
DIALIN or IMMED OUTAVAIL: Requests that
PSF start a communication
session with printer only
when output is available on
JES spool.
DIALIN or IMMED:
Requests that PSF start a
communication session
with this printer
immediately. PSF then
looks for output available
on JES spool.
NPRO N/A Not applicable to cut-sheet
Xerox printers.
OBJCONDD N/A Not applicable for TCP/IP-
attached printers.
OVLYDD None Name of font library DD
statement. Fonts in this
library must match the
resolution the IPS is using.
PAGEDEF None Name of default Page
Definition for IPS printer.
PDEFDD None Name of Page Definition
library DD statement.
Table E-5. PSF/MVS PRINTDEV statement parameters
(continued)
Item
description
Default
Source of
value Range of
acceptable values Comments
Your value