Xerox DocuPrint 180 IPS Series, Installation Planning Manual

Page: 151 / 200

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-9
PIMSG (YES,16) Installation
preferences (YES, nnn ) or
(NO, nnn )
YES: Specifies error
messages are always
printed.
nnn : Specifies maximum
number of messages
groups generated before
job is purged from spool. A
value of
0 causes printer to
print continuously,
regardless of number of
errors.
PORTNO 5001 Xerox IPS
Interface
windows Valid TCP/IP port
number between
5001 and 32767 Applicable only to TCP/IP
printers. (Ensure the
chosen port number is not
in TCP/IP list of reserved
port numbers.)
PSEGDD None Name of Page Segment
library DD statement. For
best results, the images in
page segments in this
library should match the
resolution the IPS printer is
using.
SETUP No Setup
messages
issued Installation
preferences SETUP=FORMS if
specified If specified, causes JES to
issue FORMS setup
message when a job prints
which has a FORMS
specification different from
job previously printed. This
is recommended where
there are multiple paper
stocks for use on the IPS
printer.
RELINTV Not applicable to Xerox cut-
sheet printers.
RELMODE None IDLE, TIME, or
NONE Not applicable to Xerox cut-
sheet printers.
Table E-5. PSF/MVS PRINTDEV statement parameters
(continued)
Item
description
Default
Source of
value Range of
acceptable values Comments
Your value