IPS Gateway User’s Guide (5/2002)
3-11
IPS Gateway operation
IPDS Connection
The IPDS Connection option allows you to select and configure the IPS
Gateway connection method to the host, either TCP/IP or channel-attached.
TCP/IP and channel-attached connectivity are mutually exclusive; the UI
does not allow both to be selected. Both methods are described below.
Configuring TCP/IP connection
The TCP area allows you to identify the number of the TCP/IP port used
in conjunction with the TCP/IP address assigned to the printer controller
to send data to IPS Gateway from your host computer(s).
NOTE:
PSF defaults to port number 5001 if the port number is not
changed in the printer definition.
To configure TCP/IP:
Step 1.
In the IPDS Connection area, select
TCP
.
Step 2.
In the
Port
drop-down box, enter or select the port number. The value you
enter must match the port number specified at the host for the logical
printer. Valid values are 5001 through 65535.
Step 3.
Click
Save
to save your settings and reset IPDS as indicated; see
“
Important setup instructions
” for more information.
Step 4.
Drain and restart the printer at the host for the changes to take effect.
Summary of Contents for DocuPrint 100MX
