Xerox DocuPrint 100MX, User Manual, Page: 18 / 74

Installation and setup
IPS Gateway User’s Guide (5/2002) 2-2
Requirements
This section describes IPS Gateway installation and software licensing
requirements.
Installation requirements
The following hardware and software is required to install IPS Gateway:
•
650 MHz Sun Blade™ workstation with 512MB of memory
• One of these Xerox printers:
— DocuPrint 2000 Series 75 EPS
— DocuPrint 2000 Series 90 EPS
• DocuSP, version 3.5 or higher
IPS Gateway does not require any printer memory in addition to that
already installed on your DocuPrint printer.
If your IPDS configuration requires a channel connection, you will need
an online channel board. Contact your local Xerox representative for more
information.
Licensing requirements
This feature must be licensed in IPS Gateway for IPS Gateway to function:
•
IPS/NPS
These features must be activated and enabled in DocuSP for IPS
Gateway to function:
•
IPS Gateway
• PostScript Decomposer
• SNMP Gateway
• TCP/IP Socket Gateway
Licenses are provided by your local Xerox representative prior to
installation. The license string and expiration date for each are entered
immediately following the software installation.