Xerox DocuPrint 100MX, User Manual, Page: 25 / 74

IPS Gateway User’s Guide (5/2002) 2-9
Installation and setup
Setting the DocuSP VPS option
The DocuSP VPS option must be set to NONVPS for the IPS Gateway
software to function properly.
CAUTION: If you keep the default setting of VPS , you will experience
problems with your print jobs.
The VTAM Printer Support (VPS) option allows you to configure the ports
of the TCP/IP Socket Gateway to either remove the echo commands
(VPS) or leave the data unaltered (NONVPS). This option defaults to VPS.
Reset this option to NONVPS each time you install or upgrade DocuSP;
refer to the DocuSP System Guide for instructions.
Licensing and enabling IPS/NPS
You must restart DocuSP and start IPS Gateway before licensing and
enabling the IPS/NPS software.
Restart DocuSP by selecting
Restart from the System menu on the
DocuSP window. Then start IPS Gateway by selecting IPS Gateway from
the System menu on the DocuSP window. (The IPS Gateway window
opens in Walk Up User mode.)
To license the IPS/NPS software (XRX_IPS_NPS_software):
Step 1. Log on to IPS Gateway as a System Administrator using the Logon option
on the System menu. The initial password is administ ; passwords are
case-sensitive.
Step 2. From the Setup menu, choose the License option.
Step 3. Enter your software license string and expiration date for the
XRX_IPS_NPS_software feature and click OK .
Step 4. A window opens stating that the license has been validated. Click OK .